Hanford Ready Mix, Inc. has quality concrete at competitive prices. Our concrete mixes typically surpass required strengths in 28 days. We have mixes with proven track records, thus giving our customers the confidence and satisfaction they have poured with the best.
- Footing Mixes, Flatwork and slab mixes
- Sacramento County Approved mixes
- Architectural, Stamped, colored, exposed or plain concrete
- Light weight rock mix
- Masonry Grout
- 3/8″ Pea Gravel mixes
- Black and White / Salt & Pepper Mixes
- Sand Slurry mixes
- 50/50 Aggregate Mixes
Euclid Chemical offers concrete and masonry admixtures, curing and sealing compounds, concrete repair mortars and toppings, adhesives, architectural and industrial coatings, dry shake floor hardeners, grouts, joint fillers, sealants, liquid densifiers and water repellent sealers.
Colored concrete can be used to create a striking effect around your home or property while increasing your property’s value.
Color concrete can be stamped to look like brick, wood, tile or stone at a much lower cost, while providing greater longevity. You can combine subtle shades of colors, textures and stamped patterns. You can also use multiple colors side by side, score joints and saw cut patterns to visually break up large areas such as driveways, walkways, patios, and pool decks. Color will add appeal and ambiance to any property.
We can produce concrete in a wide range of colors: from various shades of gray and warm earth tones to vivid colors that range from warm to deep and dark â€“ almost any color you can imagine. We can create hundreds of standard or custom color blends while maintaining consistent color from batch to batch. Our computer-controlled system greatly minimizes human error. Your mix will be stored in our system, so if you need to match a color a year later weâ€™ll have the exact specifications on file.
New generation in concrete reinforcement
Why should fiber reinforced concrete be used as temperature-shrinkage reinforcement instead of wire mesh? Plain and simple, the three dimensional fiber reinforcement is proactive. Wire mesh is in a single plain of the concrete whereas the fibers are throughout the concrete working to enhance its long term durability.
Applications for Fiber Reinforced Concrete:
Residential interior and exterior slabs-on-ground
- Swimming Pools
- Swimming Pool Decks
- Basement Floors
- House Slabs
- Decorative Concrete
Benefits of Fiber Reinforced Concrete:
Why a 3-dimensional reinforcement works better than wire mesh
- Reduces plastic shrinkage cracking and plastic settlement
- Modifies micro-macro cracking of the hardened concrete
- Eliminates need for wire mesh for secondary reinforcement
- Reduces permeability
- Increases impact resistance
- Increases surface abrasion resistance
- Increases fatigue strength
- All of the above adds up to less maintenance and longer life
Choosing fiber reinforced concrete means you have selected current generation engineering technology. Fiber reinforcement starts working the minute the concrete is placed in the forms and works for the life of the concrete. Fiber reinforcement does not rust, rot or corrode. It is a lifetime companion with the concrete.
Hot weather can lead to many problems in mixing, placing and curing of concrete. Hot weather is defined as any combination of high ambient temperature, high concrete temperature, low relative humidity, solar radiation and wind velocity. The affects of any combination of the above can lead to rapid evaporation of moisture. This is is the primary cause of plastic shrinkage cracks, thermal cracking, permeability and decrease in compressive strengths. Hot weather can also affect water tightness and uniformity of surface appearance in concrete. An effort should be made to keep concrete temperature as low as practical. The easiest way to keep concrete cool during hot weather is using ice in place of some of the water during batching. Ice added during batching will extend the concrete set up time during hot weather. This allows you more time to finish your concrete as desired.
Hydration Stabilizer (sometimes referred as Retarder) Hydration Stabilizer is a chemical admixture that is used during hot weather. It will improve workability during placement and slow the rate of setting time, thus giving you more time to finish your concrete. Retarder will also lower the rate of heat evolution and increase compressive strengths. Retarder is often used with ice to achieve maximum desired effects during hot weather concrete pours.
Non Chloride Accelerator
Is a non-corrosive, non-chloride admixture. It accelerates hydration, which results in shorter setting time and increases early compressive strengths. This is often used during cold winter-weather concrete placement. This additive is added at the plant during batching.
Acts the same as a non-chloride accelerator but it is not recommended for use where there is reinforcing steel, metal decks or electrical conduit. This additive is added at the plant during batching.
Hot water is added at the plant during batching when cold weather is present. Hot water accelerates set up time and strength. Cold weather concrete usually starts during the fall and continues until spring. Cold weather is defined as a period when, for more than 3 consecutive days, the following conditions exist: 1) the average daily air temperature is less than 40 degrees F. 2) the air temperature is not greater than 50 degrees F for more than one-half of any 24-hour period. The average daily air temperature is the average of the highest and lowest temperatures occurring during the period from midnight to midnight.
- 3/4″ Crushed Rock
- 3/8″ Pea Gravel – Three Colors Available
- Class II Aggregate Base
- Fill Sand
- Pea Gravel
- Top Soil – (Please Call for Availability)
- 50/50 Top Soil Mix – (Please Call for Availability)
- Compost – (Please Call for Availability)
- Round Rock
- Con Sand
- 1 x 4 Con Mix
- Mortar and Plaster Sand
- 3/8″ x 3″ Expansion
- 3/8″ x 2″ Expansion
- Med Cure
- Water Base Cure
- Anchor Bolts 1/2″ x 10″ (100)
- Anchor Bolts 5/8″ x 10″ (100)
- 5 gal of Surface Retarder
- #1 Mil Plastic Roll 9′ x 400′
- #6 Mil Plastic Roll 20″ x 100′
- Concrete gloves
We have hundreds of concrete blocks available. Their dimensions are 2′-0″ x 4′-0″ x 18″ and weigh approximately 1750 lbs. There is a lifting eye on top which makes moving them relatively easy. Blocks are great for mulch bins, weights at docks, fill for flood control or substructure for your backyard waterfall.
Handford Ready Mix is a seller of premium synthetic turfs and artificial grasses for your next project. Learn more.